Rangemaster Ignition Electrode

Product drawings

           Working principle and product details  

                      01 Product main image

The ignition electrode (ceramic ignition needle) bai is mainly assembled from high temperature resistant alumina ceramics and du resistant high temperature alloys, high temperature and high voltage wires, terminals, etc. It has the advantages of sensitive and reliable ignition, high temperature and oxidation resistance, and is widely used in liquefaction Intermittent ignition of LPG gas appliances (stove, water heater, barbecue stove, burner, gas lamp, heating stove, etc.). The high voltage resistance of the ceramic ignition electrode is greater than 18kv; the high temperature resistance of ceramic and alloy needles is less than 1400°C, the wire is used less than 300°C, and the working environment is used under RH80% at 40°C.

                             02  Ceramic

Ceramic length:36.0mm   Ceramic diameter:7.5mm

Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. High-purity alumina ceramics are ceramic materials with an Al2O3 content of over 99.9%. Because of their sintering temperature as high as 1650-1990 ℃, the transmission wavelength is 1 ~6μm, generally made into molten glass to replace platinum crucible; use its light transmittance and alkali metal corrosion resistance as a sodium lamp; in the electronics industry, it can be used as an integrated circuit substrate and high-frequency insulating material.

                                  03  Electrode

Electrode material:Ocr25Al5  Cr20Ni80

Electrode length:7.8mm

Iron-chromium-aluminum resistance electric heating alloy has the characteristics of high resistivity, low temperature coefficient of resistance and high operating temperature;

Resistance electric heating alloy, this kind of alloy has stable structure, stable electrical and physical properties, good high temperature mechanical properties, good cold deformation plasticity, good weldability, and will not produce brittle fracture after long-term use. It is mostly used in the manufacture of household appliances and heating elements whose working temperature is below 1000℃, with long service life

                                    04 Wire

Wire material:  Silicone rubber fiberglass sleeving

Fiberglass (formerly known as Fibreglass in English) is an inorganic non-metallic material with excellent performance. It has a wide variety of advantages. The advantages are good insulation, strong heat resistance, good corrosion resistance and high mechanical strength. It is made of six kinds of ores of pyrophyllite, quartz sand, limestone, dolomite, boronite, and boronite as raw materials through high-temperature melting, drawing, winding, weaving and other processes. Its monofilament diameter is several Micron to more than twenty microns, equivalent to 1/20-1/5 of a hair strand, each strand of fiber strands consists of hundreds or even thousands of monofilaments.

              05  Silicone rubber fiberglass sleeving

Silicone rubber fiberglass sleeving also known as fire-resistant sleeving, high temperature resistant sleeving, is made of high-purity alkali-free glass fiber woven into a tube, and then coated with organic silica gel on the outer wall of the tube after vulcanization to make. After vulcanization, it can be used for a long time in the temperature range of -65°C-260°C and maintain its soft and elastic properties.

                               06 Terminal

Various quick-connect terminals provide 2.8mm x 0.8 mm or 2.8mm x 0.5mm and 4.8 mm x 0.8 mm, SM terminals, sheath, and cold press ports.

Hot Tags: rangemaster ignition electrode, suppliers, manufacturers, factory, customized, wholesale, bulk, cheap, for sale, in stock, free sample