Our company has automated production equipment and advanced testing equipment, and we continuously improve the quality of boiler ceramic ignitor electrode, Gas Ignition Electrode, gas heater igniter with a sound quality management system. Our company adheres to the business philosophy of 'Quality, Safety, and Efficiency', and is committed to providing customers with high-quality products, excellent solutions and perfect and professional after-sales service. We will develop together with our customers with a sincere attitude. Guided by our insistence on innovation and continuous progress, we are moving forward to a higher goal with a steady pace and pragmatic style. Our company's scientific research and development department has strong technical force and the company provides customers with product design and production.

Product parameter

Product drawings

Working principle and product details

01 Product main image

The ignition electrode (ceramic ignition needle) bai is mainly assembled from high temperature resistant alumina ceramics and du resistant high temperature alloys, high temperature and high voltage wires, terminals, etc. It has the advantages of sensitive and reliable ignition, high temperature and oxidation resistance, and is widely used in liquefaction Intermittent ignition of LPG gas appliances (stove, water heater, barbecue stove, burner, gas lamp, heating stove, etc.). The high voltage resistance of the ceramic ignition electrode is greater than 18kv; the high temperature resistance of ceramic and alloy needles is less than 1400°C, the wire is used less than 300°C, and the working environment is used under RH80% at 40°C.

02 Ceramic

Ceramic length:52.2mm Ceramic diameter:7.5mm.6.5mm.4.5mm

Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. High-purity alumina ceramics are ceramic materials with an Al2O3 content of over 99.9%. Because of their sintering temperature as high as 1650-1990 ℃, the transmission wavelength is 1 ~6μm, generally made into molten glass to replace platinum crucible; use its light transmittance and alkali metal corrosion resistance as a sodium lamp; in the electronics industry, it can be used as an integrated circuit substrate and high-frequency insulating material.

The 95% alumina is made of hot pressure casting slurry and sintered at a high temperature of 1500℃. It has the following advantages:

1. High mechanical strength and wear resistance;

2. Strong chemical resistance to acid and alkali.

3. Good electrical insulation performance at room temperature and high temperature.

4. Small mechanical strength loss under high temperature

03 Electrode

Electrode material:Ocr25Al5 Cr20Ni80

Electrode length:1.0mm Electrode Diameter：4.0mm

Iron-chromium-aluminum resistance electric heating alloy has the characteristics of high resistivity, low temperature coefficient of resistance and high operating temperature;

Resistance electric heating alloy, this kind of alloy has stable structure, stable electrical and physical properties, good high temperature mechanical properties, good cold deformation plasticity, good weldability, and will not produce brittle fracture after long-term use. It is mostly used in the manufacture of household appliances and heating elements whose working temperature is below 1000℃, with long service life

04 Wire

Wire material: Teflon

The inner layer is a Teflon wire, and the outer layer is a black protective wire

Teflon material has the characteristics of resistance to acid, alkali, and various organic solvents. It is almost insoluble in all solvents, and has the characteristics of high temperature resistance and extremely low friction coefficient

Production process

1.Raw material mixing	2.Hot press injection molding
3.High temperature firing	4.Thermoforming
5.Glazing	6.Electrical measurement
7.Sorting	8.Assembly

Packing method

7-layer corrugated box	7-layer corrugated box	7-layer corrugated box

Yangzhou Lisheng Ceramics Co., Ltd. was established on May 31, 2010 with a registered capital of 10 million yuan. Its business scope is: electronic ceramics and ceramic accessories processing and sales. Large quantities of products are exported, mainly to North America, Japan, Europe, Taiwan, Iran and other regions.

Yangzhou Lisheng Ceramics Co., Ltd. invested 3.5 million yuan in November 2015 to rent a 2358 m2 workshop located in Shuangbao Road, Liubao Industrial Concentration Zone, Baoying County, Baoying County Liubao Industrial Zone Development Co., Ltd., and purchased a slow mixer , Hot press forming machine, environmentally friendly gas pusher furnace, high temperature pusher electric furnace and other advanced equipment, with an annual output of 6 million electronic ceramics and ceramic accessories.

FAQ:

1.Are you a manufacturer or a trader？

We are a manufacturer with our own factory located in Jiangsu.

2.Whether to provide sample service？

Yes

3.How long does it take from order to delivery；

It depends on the quantity of your order, usually around 10 days.

4.Can you provide customized services？

Yes, we can provide customized services.

With the exceptional quality and reasonable price, our Igniton Electrode for Gas BBQ Grill has been sold well in domestic and international market and received recognition and high reputation from customers. Why we can do these? Because: A, We are honest and reliable. Thanks to excellent performance and good sales service, our goods has be sold to man countries and regions, they are be well-accepted by local market. We will continue to strive for technology, work hard to improve the quality and services.

Hot Tags: ignition electrode for gas BBQ, suppliers, manufacturers, factory, customized, wholesale, bulk, cheap, for sale, in stock, free sample, Ignition Electrode For Wall Mounted, Ignition Electrode For Gas Grill, gas cooker igniter, Boiler Spark Plug, Gas BBQ ignition electrode, Ignition needle for gas oven