How to check oven spark plugs

Jul 10, 2022

Leave a message

1. The gas stove spark plug is a metal needle fixed in a ceramic jacket, it has no electronic components. You can judge whether it is damaged from the outside or measure its on-off or resistance value with a multimeter;

2. Disassemble the gas stove, remove the spark plug and observe whether the metal on the tail and the head is dirty. The resistance value from the head to the tail measured by a multimeter should be zero. If the resistance value is too large, the surface is too dirty. At this point, you should grind or replace the spark plug directly;

3. Observe whether the outer ceramic cylinder of the spark plug is cracked or ablated by high-voltage ignition. If it is partially yellowed and there is a ignition point, it means that the ceramic insulation performance has deteriorated and cannot be used continuously, and it should be replaced. If there is cracking, you should replace the new spark plug in time;

4. Check whether the steel needle and ceramic of the spark plug are loose and displaced. If there is looseness, the ignition needle should be replaced in time;

5. If the spark plug and the ignition wire are integrated, when testing, it is also necessary to measure whether the ignition wire and the spark plug are well connected, and whether the resistance value is close to zero ohms. If the resistance value is large, it means that there is contact resistance, and the spark plug and ignition wire must be reconnected to ensure good continuity.

5

Send Inquiry