How to detect the quality of the spark electrode of the gas stove

Apr 22, 2022

Leave a message

The method of detecting the quality of the spark electrode of the gas stove:

1. The spark electrode of the gas stove is a metal needle fixed in a ceramic jacket, and it has no electronic components. You can judge whether it is damaged from the outside or measure its on-off or resistance value with a multimeter.

2. Disassemble the gas stove, remove the spark electrode and observe whether the metal at the tail and head of the spark electrode is dirty. The resistance value from the head to the tail measured by a multimeter should be zero. If the resistance value is too large, the surface is too dirty. At this point, grinding or direct replacement of the spark electrode should be performed.

3. Observe whether the outer ceramic cylinder of the spark electrode is cracked or ablated by high-voltage ignition. If there is a spark point in the local yellowing, it means that its ceramic insulation performance has deteriorated and cannot be used continuously, and it should be replaced. If there is cracking, a new spark electrode should be replaced in time.

2


Send Inquiry