Integrated stove how to change the spark electrode
Apr 25, 2022
Leave a message
1. Remove the pot holder from the stove head
2. Take down the fire plate, one large and one small. The new one is better to take down, and the oil and water that has taken a long time to rust after high temperature is not easy to take down.
3, after the fire plate is taken down is the base of the furnace plate, take this must be careful not to break the induction needle, spark electrode and induction needle are ceramic, easy to break, rust can be used to wrench or long flat screwdriver slowly cocked up.
4, remove the liquid tray, there are 3 screws on the liquid plate, if the rust can be used with 8 hex socket wrenches This works very well! After the three screws are removed, the liquid can be taken down!
5, loosen the screws of the fixed spark electrode on the head of the cast iron stove, use a short screwdriver, because the space is too small, you can only use a short screwdriver, if the slip wire can be clamped left and right with sharp nozzle pliers, it can be loosened!
6, the last step is to replace the broken spark electrode

