How to check oven spark plugs?
Apr 18, 2022
Leave a message
1. An oven spark plug is just a metal pin fixed in a ceramic jacket, it has no electronic components. You can judge whether it is damaged from the outside or measure its on-off or resistance value with a multimeter;
2. Disassemble the oven stove, remove the oven spark plug, and observe whether the tail of the spark plug and the metal of the head are dirty. The resistance value from the head to the tail measured by a multimeter should be zero. If the resistance value is too large, the surface is too dirty. At this point, you should grind or replace the oven spark plug directly;
3. Observe whether the outer ceramic cylinder of the spark plug of the oven is cracked or ablated by high-voltage ignition. If it is partially yellowed and there is a spark, it means that its ceramic insulation performance has deteriorated and cannot be used continuously and should be replaced. If there is cracking, you should replace the new oven spark plug in time;
4. Check whether the steel needle and ceramics of the oven spark plug are loose and displaced. If there is any looseness, the oven spark plug should be replaced in time;
5. If the oven spark plug is integrated with the ignition wire, when testing, it is also necessary to measure whether the ignition wire and the oven spark plug are well connected and whether the resistance value is close to zero ohms. If the resistance value is large, it means there is contact resistance, and you must reconnect the oven spark plug and ignition wire to ensure good continuity.

