oven igniter replacement

1. Remove the switch knob and waterproof nut on the panel of the gas cooker;

2. Remove the screws on the left and right water pans on the stove panel;

3. Separate the panel and bottom box of the gas cooker, and remove the panel;

4. Loosen the gas pipe, remove the ignition needle connection line on the pulser and the ignition needle on the burner;

5. Replace the ignition needle and wire with a new one, then insert the pulser and fix the screw;

6. Place the battery, press the switch knob, and carry out the ignition test;

7. Reset the gas pipe, burner head, and install the fixing screws;

8. Install the gas cooker panel, sturdy waterproof nuts, and replace the switch knob and water pan screw;

9. After the replacement is completed, connect to the gas ignition for use.