The overhaul and maintenance of the cooling air system of the flame detector

The cooling air system of the flame detector is an indispensable part in industries such as thermal power plants. In the previous introduction, everyone has learned that the flame detector cooling air system is an important guarantee for the long-term safe operation of the flame detector probe. Today, flame detector manufacturers tell you about the overhaul and maintenance of the flame detector cooling air system.

The fire detection cooling air system is mainly composed of two standby cooling fans, pressure switches, air duct conversion baffles, metal filters, cooling fan control cabinets, etc. The two fans share a control cabinet, which is based on the cooling air system The operating conditions control the start and stop of the two fans.

Inspection and maintenance of the cooling air system:

1. Regularly check various components in the cabinet to make sure that there are no loose screws in any unit, and all power supply and wire connections are safe; and keep the appearance intact.

2. Purge the cabinet regularly to remove accumulated dust and debris and keep the cabinet sanitary.

3. Regularly check all fuses, relays and other replaceable components in the control cabinet, and replace damaged components in time.

In order to ensure the safe operation of the flame detector, the cooling air system must be checked at all times, and try to find out some problems in advance to prevent failures, which will affect the use of the flame detector and the production.