What is the gas stove ignition electrode constantly lighting?

(1) The valve body is stuck when it is pressed down. The gas stove is used for a long time, and the valve body will leave residue and attach oil, resulting in the valve body being stuck when pressed down and cannot bounce back, and eventually the phenomenon of continuous ignition will occur. In view of this situation, we first clean the valve body, and then observe whether it returns to normal; if the fault is still not ruled out, then replace the valve body to try; after replacing the valve body, we still can't solve the problem, then choose to replace a new lighter.

(2) Improper adjustment of the damper. Improper adjustment of the damper sometimes occurs that the fire is always on, at which time we adjust the damper to adjust the best when the flame is blue.

(3) Pipe blockage. When the gas stove is always on fire, if we can smell the smell of coal, it means that the pipe of the stove is blocked by foreign matter. At this time, we must dredge the pipeline or choose to replace the pipeline, and if necessary, ask a professional master to repair it.

(4) Thermal needle and thread fall off. After the firing needle is used for a period of time, the thread under the needle is easily detached, and the phenomenon of constant ignition occurs. At this time, we first cut off the thread under the thermal needle by 5 mm, and then insert it into the thermal needle, and then wrap it around the connection between the thin iron wire or fine copper wire and the needle for a few turns to fix it, and then retry it on ignition, if it does not ring, prove the troubleshooting, if it is still loud, it proves that the thermal needle is broken and needs to be replaced.

(5) The ignition needle is dirty. The ignition needle is easily contaminated with oil scale, and the oil scale attachment causes the ignition needle to not work properly. At this time, we will clean the grease around the ignition needle and wipe it with a dry cloth.

(6) Poor circuit contact. Due to the frequent use of the gas stove, the circuit will fail, resulting in unstable ignition, and it has been dabbling and firing. In this case, we have to re-check the circuit, and on the problem of circuit failure, we must ask professional maintenance personnel to check step by step, and then repair according to the corresponding situation.