Alumina Ceramic Finishing And Packaging Process

May 11, 2021

Leave a message

Some alumina ceramic materials still need finishing after sintering. For example, products that can be used as artificial bones require a high surface finish, like a mirror surface, to increase lubricity. Due to the high hardness of alumina ceramic material, it is necessary to use harder grinding and polishing tile materials for finishing. Such as SIC, B4C or diamonds and so on. Usually use coarse to fine abrasives to grind step by step, and finally the surface is polished. Generally, fine Al2O3 powder or diamond paste of <1μm micron can be used for grinding and polishing. In addition, laser processing and ultrasonic processing, grinding and polishing methods can also be used.

Send Inquiry