Ceramic Ceramic Molding Method
Aug 17, 2021
Leave a message
Grouting is the earliest molding method used for alumina ceramics. Due to the use of plaster molds, the cost is low and it is easy to form large-sized and complex-shaped parts. The key to grouting is the preparation of alumina slurry. Usually water is used as the flux medium, and then the debonding agent and the binder are added, and the gas is exhausted after being fully ground, and then poured into the plaster mold. Due to the absorption of water by the capillary of the plaster mold, the slurry solidifies in the mold. When hollow grouting, when the mold wall absorbs the slurry to the required thickness, the excess slurry needs to be poured out. In order to reduce the shrinkage of the body, high-concentration slurry should be used as much as possible

