Gas Stove Spark Plug Does Not Light How To Deal With
Apr 22, 2022
Leave a message
1. Observe the spark when the gas stove is fired, whether the sound is soft and weak, and the discharge frequency is significantly slower than before. If this is the case, it is our battery that is insufficient, and a new battery will be solved.
2. If the spark sound is crisp and powerful, but it is not ignited, then consider whether the gas path is unobstructed, it is likely that the nozzle inside the stove head is blocked during use, remove the fire cover with a thin wire to pass the nozzle hole, and then put back the fire cover from the new ignition.
3. Check whether the valve door of the gas stove body is too large, causing too much air flow out of the fire hole and impacting the electric spark. You can adjust the damper left and right to try to see if the ignition becomes normal.
4. One side of the stove is normal, the other side of the stove is not normal. If the abnormal side is completely without sparks, one of the high-voltage packages in the electronic pulse is burned out, and only the replacement pulse can be solved. If not, look at whether it is the above two cases, 2 or 3.
5. It needs to be ignited several times in a row, and it may not be successfully ignited. This situation is mostly caused by thermocouple induction gas stove, due to the aging of thermocouple long-term use. At this time, only the thermocouple induction needle can be replaced.
6. Ignition is normal at times and abnormal at times. This situation is mainly caused by the poor contact of the pulse ignition micro switch, and the adjustment pulse ignition micro switch is solved.

