Principle of high energy igniter

Jan 17, 2020

Leave a message

There are many reasons why the high-energy igniter does not ignite and the treatment of the high-energy igniter does not ignite. The editor summarizes the following points for you. You can refer to it-next, test whether you can solve the common fault conditions:

The root cause of ignition at the junction of the igniter and the cable: poor contact between the igniter and the cable. Clearance method: connect the relative components firmly. Common fault conditions: the ignition system has no sparks and sparks.

root cause:

1. The system software switching power supply is not turned on

2. Poor contact between the cable and the igniter or igniter

3. Cable short circuit fault or short circuit

4. The ignition gun is damaged

5. The igniter is damaged and the high-energy igniter manufacturer introduces common troubleshooting:

1. Check and type the power plug of the switching power supply

2. Check that the igniter and the ignition gun are in good contact with the ignition cable

3. The damaged cable needs to be replaced

4. Replace the ignition gun if damaged

5. The igniter needs to be replaced if damaged


Send Inquiry