Maintenance of high-energy ignition device in winter

Jan 18, 2020

Leave a message

First, the configuration and selection of high-energy ignition device. High-energy ignition device is mainly composed of three parts: high-energy igniter, igniter, and ignition cable. It can be used to ignite gas, compressed natural gas, diesel engine, gasoline, fuel oil, residual oil, etc. immediately . The selection of high-energy ignition devices is based on the application manufacturing industry, the selection and application of ignition materials, different applications, different ignition materials, and different models and specifications. Only then can you save costs and do what you want. Actual effect of ignition. If the selection is not suitable, the ignition cable configuration is too long, it will endanger the actual effect of ignition, the frequency of ignition will undoubtedly increase, and the time exceeds the application requirements, it will endanger the life of the device.

Secondly, how to use 1. Relatively speaking, a set of high-energy igniter is very easy to damage the ignition rod. Because the internal ceramic parts are used, it can not be heavy. It is not necessary to remove the ignition gun to clear the tantrum during the whole application process. The high-energy ignition device produced by Xi’an high-energy igniter manufacturer, the ignition end is resistant to carbon deposits, and can also ignite in the case of carbon deposits; 2. When the device is not connected to the cable or the ignition gun, do not connect to the power source, otherwise it will be destroyed Device; 3. Some components of the device are operated under long-term load, and the required working cycle time should be strictly implemented; 4. The maintenance of the device must be carried out five minutes after the switching power supply is turned off (to ensure that the remaining charge of the capacitor is leaked The discharge resistor has been discharged);


Send Inquiry