Quality identification method of explosion-proof high-energy igniter
Jan 20, 2020
Leave a message
1. When all the wires of the igniter are plugged in, there is no need to connect the power plug (the charging terminal of the AC igniter), or unplug the high voltage output wire of the magneto beforehand. After clarifying that the ground wire of the igniter is well connected with the ground wire of the power circuit in the car, pull out the high pressure cap from the spark plug, and insert a spark plug with backup data on the body. The final step is to connect the rectifier circuit on the motorcycle (the zero line of the live wire is connected to the battery + pole.) to the charging terminal of the igniter.
2. After connecting the high-energy igniter to the power supply circuit as described, rotate the magneto to turn on the sensor and send the ignition data signal to the igniter to see if the spark plug is igniting. If the spark plug ignites, this is a DC igniter. (The charging terminal of the AC igniter generally accepts a working voltage of several hundred volts, and ignores the 12 V of the battery.) If it does not ignite temporarily, you must carefully check the cause, or use the watt-hour meter measurement method to clarify the characteristics of the igniter. Wrongly judged as an AC igniter.
3. The more commercial safe method is to use the bottom voltage switching power supply to do continuous testing of the igniter, and it is clear that it is not the bottom piezoelectric DC igniter before it can be judged as an AC igniter. There are standard car owners friends who can apply a small current DC high voltage power supply. If it is a DC igniter, it can also be because the current is small = the working voltage is reduced without damaging the igniter. However, the high pressure of the small current will also complete the charging of the AC igniter, so be careful of charging and discharging and numb hands when testing.
4. For special situations, such as inductors and high-voltage packages, it is not appropriate to provide CDI igniters; some are igniters combined with high-voltage packages, such as XH 90 four-stroke integrated igniter. Others are self-opening two-stroke AC igniters, which use magneto DC high-voltage power supplies, charge and store energy in the forward direction / charge and discharge in the reverse direction.

