Use and maintenance of high energy igniter

The high-energy igniter is a capacitor energy storage low-voltage high-energy discharge device, which forms a high-energy ignition device with a high-energy igniter and a high-voltage shielded cable. Mainly used in industrial kilns, boilers, chemical waste gas, coking steel plant tail gas and other places where ignition is required, and can be used to directly ignite natural gas, coke oven gas, light diesel oil, heavy oil, etc. The high-energy igniter produced by our company has the characteristics of oil resistance, water resistance, coking resistance, high temperature resistance, large output ignition energy, high ignition frequency, anti-pollution and humidity, compact structure, safety and reliability.

High-energy igniters are mainly used in industrial kilns, boilers, chemical waste gas, coking steel plant tail gas and other places that need to be ignited. High-energy igniters use capacitor energy storage, which has a large ignition energy. The station conductor emits a pyroelectric nozzle, which has a strong Its self-cleaning ability is not affected by atmospheric pollution, and is resistant to oil, water, coking, and high temperature.

Use attention

1. When the high-energy igniter is ignited, the combustion air should be turned off. You can wait for a while and then gradually increase the spontaneous combustion air

2. When igniting, the high-energy igniter should ignite first, and then inject fuel (gas), the ignition market should not exceed 30 seconds

3. The fuel should be atomized well, and the quality of the atomization of the oil gun determines the success rate of ignition

4. The working time of the igniter should be once every 30 seconds. If the ignition fails once, stop for 1 minute before using