What is the working principle of pulse igniter?

Feb 07, 2021

Leave a message

    The principle of the electric pulse igniter: The electric pulse igniter is a device that uses high-voltage electric sparks to ignite the combustible gas in the stove. The input shu working voltage can be divided into DC 1.5V, 3V, 6V, 9V, etc. and AC 120V, 240V, etc. According to its input working voltage, it can be divided into DC 1.5V, 3V, 6V, 9V, etc. According to its output function, it can be divided into one to eight output terminals. Now take DC1.5V as an example to illustrate its working principle.

    The commonly used circuits are as follows: T1, BG, and R form an oscillatory boost circuit, which increases the 1.5V direct current to about 400V alternating current. After being rectified by D, it goes to C1. When the voltage across C1 rises to a certain value, BG2 Suddenly, the internal resistance is very small when the switch is turned on. At this time, C1 passes through and the primary coil of T2 discharges. The discharge time is very short and the current is large. Therefore, the secondary voltage of T should be very high. , (Up to 15-30KV) spark discharge can be generated between its two leads. In addition, when BG2 is found, the secondary T1 is equivalent to a short circuit, and BG1 stops oscillating. When C1 is discharged, BG2 returns to the disconnected state.

    BG1 immediately starts to oscillate and boost again, repeating the aforementioned working process, so the electric spark produced is a continuous spark with a certain intermittent. The discharge frequency is about 2.5-12 times per second.


Send Inquiry