Burner Debugging Method

Jan 10, 2020

Leave a message

Compressed air-Many burners require compressed air to operate normally. First check whether the compressor can provide the pressure required by the burner. Clean all the filters on the pipeline, check whether there is any leakage in the pipeline, and repair it in time.

Typical combustor commissioning methods include fuel analysis and a series of adjustments that enable the combustor to achieve good operating performance while maintaining combustion power. Basic commissioning can be completed in a day or less, and before various tests are performed.

It is especially important to debug the burner after the complete burner maintenance program is completed. The commissioning of the burner should be carried out under normal conditions. Fuel samples should be taken from the fuel tank, so as to effectively and accurately describe the working conditions of the burner. The commissioning of the burner is based on the sampling information of the combustion flue gas.

Any adjustments to air and fuel will affect the flue gas emissions. The flue gas composition can be studied and the efficiency of combustion can be analyzed. The following table lists the combustion products and their causes. Regular burner maintenance procedures are necessary to avoid downtime and extend the life of the combustion system.


Send Inquiry