How To Maintain The Burner Regularly

Jan 11, 2020

Leave a message

When using the burner, the maintenance and maintenance of the burner is very important. Regular maintenance and maintenance are important conditions for extending the life of the burner. Before maintenance, the burner and its parts should be thoroughly inspected. Routine maintenance of the burner can save a lot of energy and money and extend the life of the combustion system. A burner that has undergone regular maintenance can effectively adapt to changes in the working environment in time.

Burner-For oil-fired burners, clean the "y" type filter. A good filtering effect of heavy oil and residual oil is the key to preventing blockage of fuel injectors and valves.

a. Check the pressure difference on the burner to see if it is working normally and the oil pressure is within the proper range, so as to ensure that the fuel pressure can be read accurately after adjusting the burner. Adjust the extension length of the atomizer on the nozzle, adjust and detect the low oil pressure switch. When using heavy oil, check the fuel heating and control device, and check the oil temperature switch on the burner tube group.

b. Main gas source for natural gas burners-For burners that use natural gas as fuel, check the main gas source regulating valve to ensure that the circuit is in good condition. Do not adjust the regulating valve of the gas company. The gas company will assist in cleaning, maintaining and adjusting the main gas source regulating valve. If there is a sensing circuit, check whether it is damaged.

c. Burners for other fuels In addition to the above-mentioned fuels, there are many kinds of fuels for burners. Burner manufacturers can assist in providing burner maintenance schedules and procedures when using other fuels, and determine a good maintenance plan.

d. Don't ignore the oxygen supply. Once the maintenance plan of the fuel supply system and burner has been determined, check the oxygen supply of the system. The oxygen supply of most burners is achieved through a fan or fan combination system.


Send Inquiry