Large-capacity boiler pulverized coal burner ignition

Jan 14, 2020

Leave a message

The igniters of conventional igniters have various types such as electric spark, electric arc, and resistance wire.

The resistance wire igniter has simple equipment and compact structure, but the resistance is easy to be oxidized and burnt, and the burn is extremely serious when directly igniting heavy oil. Currently, it is only used on some oil-fired boilers. The arc igniter can obtain high power, but because of the low voltage, it is not easy to break down the pollution layer and start the arc, and the ablation is serious, the equipment is large and heavy, and it is gradually replaced by the electric spark device.

Among the electric spark ignition devices, high-voltage electric sparks (discharged by a voltage of 5000-8000V through the gap between the two poles) are the most widely used. Furthermore, there are high-frequency and high-voltage electric spark and high-energy electric spark ignition devices, which have even more excellent performance.

In conventional ignition burners, the ignition burner and auxiliary burner dedicated to ignition are sometimes not clearly distinguishable. But generally the former is only used to ignite the fuel when starting, and has a small capacity. It will stop soon after igniting the main flame and burning stably, instead of maintaining the entire ignition and starting process. However, for modern large-capacity boilers, in order to ensure the safety of operation, some ignition burners are used in unfavorable working conditions or accidental working conditions (such as poor coal quality, low load or abnormal coal feed), in addition to being used during ignition. Etc.) It is also needed to maintain a stable fire; on some boilers, the igniter must be put in before the main burner is turned off to ensure safety. This latter kind of igniter belongs to the category of ignition and auxiliary burners, or is called the ignition burner that maintains ignition according to some habits.


Send Inquiry