How To Maintain The Burner
Jan 12, 2020
Leave a message
When using the burner, the maintenance and maintenance of the burner is very important. Regular maintenance and maintenance are important conditions for extending the life of the burner. Before maintenance, the burner and its parts should be thoroughly inspected. Routine maintenance of the burner can save a lot of energy and money and extend the life of the combustion system. A burner that has undergone regular maintenance can effectively adapt to changes in the working environment in time.
Consult the manufacturer for the required oil viscosity to ensure that the burner works normally, and regularly check whether the viscosity of the heavy oil or residual oil meets the requirements. It is also necessary to clean and lubricate the valve connection. If the connection is sticky or too rough, repair or replace with suitable accessories. Finally, clean the grease nipple regularly as required by the manufacturer.
Filter-If a "y" type filter is installed in front of the control valve, pay attention to cleaning the control valve-check the control valve on the gas burner to see if the adjustment bolt is easy to adjust. Make sure that all outlets and screens are not blocked.
Burner-check the gas pipe group, confirm whether the manual switch adjustment is sensitive, and whether the valve handle is installed.
Check whether the barometer is working properly. When adjusting gas burners, accurate pressure display is critical. Rotate the low pressure and high pressure switches to confirm their working conditions. The connection of the air valve needs to be cleaned and lubricated. If the connection is sticky or too rough, it needs to be replaced with suitable accessories. If the burner is equipped with a detachable pipe, it should also be cleaned.

