Various Characteristics Of Combustion Flame
Jan 13, 2020
Leave a message
Combustion flame has various characteristics, such as heating degree, ionization state, radiation of different parts of flame, spectrum and flame pulsation or flicker phenomenon, differential pressure, sound, etc., which can be used to detect the presence or absence of flame. Boilers that use coal and oil as fuel emit infrared (IR), visible light and ultraviolet (UV) during the combustion process. All fuel combustion radiates a certain amount of ultraviolet and a large amount of infrared, and the spectral range involves infrared, visible and ultraviolet. Therefore, the entire spectral range can be used to detect the presence or absence of flame. Due to different types of fuel, the intensity of the light radiated by the burning flame is different, and the flame detection elements used will be different.
Generally speaking, in addition to triatomic gases such as non-luminous CO2 and water vapor, there are some glowing coke particles and carbon particles in the pulverized coal flame. They radiate strong infrared, visible light and some ultraviolet rays, and ultraviolet rays often It is easily absorbed by combustion products and ash particles and is quickly weakened. Therefore, visible light or infrared flame detectors should be used for pulverized coal combustion flames. In the oil flame used for heating and ignition, in addition to a part of CO2 and water vapor, there are also a large number of luminescent carbon black particles. It can also radiate strong visible light, infrared and ultraviolet light, so these three A flame-sensitive detection element for measurement. When combustible gas is burned as the main fuel, strong ultraviolet rays are radiated in the initial combustion zone of the flame. In this case, an ultraviolet flame detector can be used for detection. Except for radiating steady-state electromagnetic waves, all flames are pulsating.

